Product Overview
Reduce your telecom expenses with The Stick from MultiLink, Inc. The Stick automatically screens and routes all incoming voice, fax, and modem calls to the right equipment every time so there is no more need for multiple costly phone lines.
Customers frequently achieve return on investment within three months. The Stick is easy to use. There are no drivers or software to install. It works with any type of phone system or telephony device.
The Stick"?s reliability and programming flexibility can handle demanding business applications, yet it is simple enough to use at home. Other features, like DSL & Caller ID compatibility, surge protection, barge-in protection, and Bell Spec ring-back tones have made The Stick a favorite with professional installers for over 20 years.
The Stick is a proven money saving solution. Thousands of satisfied MultiLink customers are cutting their telecom expenses each and every month.
Features:
AUTOMATIC FAX DETECTION
Preprogrammed to auto route fax calls to fax or fax modem.
BARGEIN PROTECTION
Prevents active calls from interruption by another device connected to The Stick.
FULLY PROGRAMMABLE
Program all features via telephone keypad; no PC interface or drivers to install.
MANUAL TRANSFER CAPABILITY
Transfer a call to any device port by touch tones.
PROGRAMMABLE SECURITY ACCESS CODES
User defined transfer codes provide security and control.
BELL SPEC RINGBACK TONES
The Stick transmits a "ringback that sounds just like the phone company"?s.
NONVOLATILE MEMORY
Programming is preserved after a power outage.
REMOTE PROGRAMMING AND DIAGNOSTICS
ONE YEAR LIMITED WARRANTY
Benefits
- Saves money by eliminating unnecessary phone lines
- Automatically directs calls to phone, fax, modems for network support service ports
- Add equipment without adding phone lines
- Fully programmable
- Works on any phone system
Applications
- OutofBand Network Access
- Energy Management Controls
- PointofSale System Integration
- Modem Polling
- Fuel Tank Monitoring
- Automated Meter Reading
- Small/Home Office
- Service Port Access
- Remote Equipment Maintenance
How does The Stick work?
When installed on a typical phone line, The Stick automatically answers inbound calls and "listens for fax tones and Security Access Codes (DTMF or touch tones). During this screening process, The Stick transmits a high quality ringback to the calling party. When the screening operation is complete, the call is immediately routed to the correct device. All this takes place in just a few
seconds!
Technical Specifications:
Model Number STK29112
Input Power Requirements
At AC Transformer: 110125 Volts AC only, 5060 Hz
At Power Jack on The Stick: 12/14 Volts AC?,.14/16 Volts DC
Power Consumption: 6.2 Watts
Power Consumption at standby:
Approx. 44mA @ 12 VDC
Approx. 50mA AC at 120VAC
CO Interface
Ringer Equivalence Number: 0.5B
Input Ring Detection: 40150 Volts AC, 1568 Hz
Physical: 8.2" L x 1.45" D x 2.5" H, 1 lb
Device Interface
Battery: 48 Volts Nominal DC to all devices
OffHook Detection: 380 mA
Ring Generator Frequency: 30 Hz (+/0.1) Hz Voltage Regulated and current limited
Waveform: True Sinusoidal
Ringing No Load: Approximately 82.8 Volts RMS AC
Ringing 8K Ohm Imp. (REN1.0): Approx 81.6 Volts RMS AC
Ringing 4KOhm Imp. (REN2.0): Approx 73.0 Volts RMS AC
Ringing 2.7KOhm Imp. (REN3.0): Approx 64.5 Volts RMS AC
Ringing 2KOhm Imp. (REN4.0): Approx 55.0 Volts RMS AC
Ringing 1.8K Ohm Imp.(REN5.0): Approx 49.5 Volts RMS AC
